Under federal law, it is completely legal to build a firearm on your own; however, people make several mistakes during this process. Several parts of the Glock visible from the outside are the chamber, the frame, the trigger and trigger guard, the slide catch, and the magazine well. If you have basic firearm know-how and an interest in building your own handgun, 80percentarms.com has a Glock lower parts kit to help you build your next Glock. For building a firearm, always choose parts of recommended industries. Building a pistol at home is not challenging if you identify and understand the functions of individual parts of a Glock pistol and avoid a few common mistakes given below.
Common Mistakes to Avoid:
- In the case of ammunition, the SAAMI standard is recommended. +p+ should be avoided because it can generate high pressure, which causes the parts of your firearm to wear earlier.
- Glock frame is made of nylon 6 polymer, and this material provides its resistance to wear and tear, corrosion and discoloration. While building frames, never choose carbon steel or other steel alloys because they get corroded quickly. If you want a complete self-made gun, never use a factory frame. Always pay attention to the size of the frame, i.e., never use a 19-sized frame in 17 Glock because it won’t work there.
- A full-size Glock is a more accurate one, so for making Glock for competition purposes, always choose a frame with a long barrel, i.e.,a competition frame. Avoid standard sizes because they have medium-sized barrels, which will not be helpful in case of competitions.
- Do not use a hammer for driving pins in and out. Instead, always use a punch of appropriate size.
- Do not use gen 4 trigger housing because it can cause a crack in the rear wall of the magazine well. Instead, you can remove the gen 4 ejector from a gen 4 trigger and reinstall it on gen 3 trigger housing. The trigger housing is actually a metallic thing that mounts the trigger. The trigger housing pin is also made of black polymer, and it ensures a safe back strap for the pistol frame.
- Recoil spring channel should be cut so the vertical walls and metal rail insert would be flushed together; otherwise, it can prove dangerous.
- Glock has three safeties, i.e., Trigger Safety, Firing Pin Safety, and Drop Safety. These safeties are built-in fire control systems. The material used in this system is a lever and trigger bar. Never ignore the use of safeties because this will cause the pistol to fire even on dropping or before the user is ready for the next fire.
Avoiding all the above mistakes will enable you to build a pistol of your choice and ensure a safe weapon. To build a Glock, you need to find out what you want and what you don’t want in your Glock. Follow the above instructions, and then build the weapon step by step, keeping in view the quality of individual parts. Suppose any technical issue occurs with a pistol; in that case, it is easy for you to troubleshoot because building a pistol yourself gives you understanding and information of all parts toquickly figure out that problem.